Train at home using
about Orders and Shipments during Covid-19
3ShipFree isn't valid with discounted products and/or coupons

Product was successfully added to your shopping cart.
Rifle Pro-Training Bar Rifle Pro-Training Bar Rifle Pro-Training Bar Rifle Pro-Training Bar Rifle Pro-Training Bar Rifle Pro-Training Bar Rifle Pro-Training Bar Rifle Pro-Training Bar Rifle Pro-Training Bar
Rifle Pro-Training Bar

Description

The Rifle Pro-Training Bar is a Weight Lifting Bar. It can be included among the Xenios USA® Training Bars as a perfect tool for Weight Lifting Classes and Olympic WODs. It features the ultimate patent-pending “Rifle Knurling”. The Rifle Knurling was developed by the Xenios USA® R&D Dept inspired by the pattern used on firearm grips. The Rifle Knurling pattern increases the hands’ grip on the bar while reducing the sharpness of the steel surface, therefore, reducing pain and the injuries to the hands.

Last but not least, the Rifle Knurling, thanks to its special design, helps to wipe off chalk. Compared with the standard “Diamond” or “Reverse Diamond” Bar knurling patterns, the Rifle Knurling doesn’t feature any carved spots, so the chalk can’t get anywhere that makes it difficult to be removed.
On the Rifle Pro-Training Bar shaft there are the Weight Lifting and the Power Lifting marks and there isn’t the central knurling.

The Rifle Pro-Training Bar is manufactured by using high grade spring steel. The shaft is heat-treated in order to reach a tensile strength of 250.000+ PSI and it is made by using steel rods tested by 1500 Lbs (750 Kg.) Max. Load. The steel of the Rifle Pro-Training Bar’s shaft features the perfect whip for Weight Lifting and it has a lifetime warranty against bending and breakages. The Rifle Pro-Training Bar complies with the IWF Weight Lifting Men Bar specifications, so: 220 cm length, 20 Kg weight, 28 mm shaft diameter. Sleeves are fine grooved to reduce the probability of plates sliding off while touch-and-go drops are continuously performed.
Sleeves are assembled with the Xenios USA® double-safe locking system: one inner steel fork to prevent the sleeve from snapping off and two outer snap-rings to prevent the sleeves from outside-to-inside sliding.

Sleeves revolve on oversized bronze bushings (inner side) and 2Z-Ball Bearings (outer side). Sleeves construction parts are all factory-lubricated.
Shaft and Sleeves of the Rifle Pro-Training Bar are all bright Zinc Plated in order to be rust resistant.

At Xenios USA® we also care about the equipment aesthetic, so the Rifle Pro-Training Bar features a one-of-a-kind design set of ID, meaning, : the Boss aluminum ring, the Boss silicon bracelet and the Sleeve end-cap.


Gear Specs

- Bar Type - Man 
- Bar Use - WL/Oly WL/Multipurpose 
 - Bushings/Bearings - Bronze Bushings 
- Weight - 20 Kg
- Total Length - 220 cm
- Material - Spring Steel 
- Diameter 28 mm
- Knurl - Rifle (patent pending)
- Center Knurl - No 
- Marks - Dual 
- Shaft Coating - Bright Zinc
- Sleeve Coating - Bright Zinc 
- Sleeve Length - 41.5 cm
- Tensile Strength - 250.000+ PSI 
- Max load - 450 Kg
- Warranty - Lifetime*

Default Category

Rifle Pro-Training Bar

SKU: XSOBAR11

€474.99
VAT Excl.: €389.34

Gear specs

The knurling texture of the Xenios USA Rifle Bars is made by an exclusive and patented desing created at the Xenios USA product dept. We have been the first to launch this special knurling on 2016. Many have tried to copy and many keep trying to do it, but the genuine design is only the Xenios  USA one, so beware of copies!

Do you have a Gym or a Box ? Ask for the operator price list.

Contact our Sales Dept. by filling out the form.

Have your say about this product.
Review this product
Xenios Product Vat Free

Come prescritto dalla legge IVA della Comunità Economica Europea, nel caso in cui tu intenda acquistare come società dotata di una Partita IVA Europea, potrai ricevere una fattura VAT FREE. Questo è possibile in quanto le fatture per i tuoi ordini sono emesse da uno stato Europeo, verso un altro stato Europeo.

Quando arrivi al check-out sul nostro sito, troverai un campo dedicato all’inserimento della tua partita IVA. Riempiendo detto campo, il sito verificherà il tuo Codice IVA con il sito della Comunità Economica Europea e, in caso di esito positivo, l’importo IVA del carrello verrà eliminato. In caso di esito negativo, il tuo ordine non potrà essere processato con Partita IVA, ma solo come acquisto da parte di privato.

Sfortunatamente non possiamo vendere e fatturare a soggetti dotati di Codice IVA Europea non verificabile/valido. In ogni caso, se pensi che ci sia un errore di verifica, non preoccuparti, scrivici a e ti aiuteremo a risolvere il problema.

Purtroppo il sistema VAT FREE non è applicabile ai clienti residenti in Italia. Quindi, se sei una società di diritto Italiano, puoi in ogni caso acquistare richiedendoci di ricevere una fattura intestata alla Partita IVA, ma dovrai sempre pagare il totale del tuo carrello, IVA inclusa.

Bronze Bushings

Sleeves are assembled with the Xenios USA® double-safe locking system: one inner steel fork to prevent the sleeve from snapping off and two outer snap-rings to prevent the sleeves from outside-to-inside sliding. Sleeves revolve on oversized bronze bushings (inner side) and 2Z-Ball Bearings (outer side). Sleeves construction parts are all factory-lubricated.
Shaft and Sleeves of the Rifle Pro-Training Bar are all bright Zinc Plated in order to be rust resistant.

The Rifle Knurling

The Rifle Pro-Training Bar is a Weight Lifting Bar. It can be included among the Xenios USA® Training Bars as a perfect tool for Weight Lifting Classes and Olympic WODs. It features the ultimate patent-pending “Rifle Knurling”. The Rifle Knurling was developed by the Xenios USA® R&D Dept inspired by the pattern used on firearm grips. The Rifle Knurling pattern increases the hands’ grip on the bar while reducing the sharpness of the steel surface, therefore, reducing pain and the injuries to the hands.

Rifle Pro-Training Bar

The Rifle Pro-Training Bar is manufactured by using high grade spring steel. The shaft is heat-treated in order to reach a tensile strength of 250.000+ PSI and it is made by using steel rods tested by 1500 Lbs (750 Kg.) Max. Load. The steel of the Rifle Pro-Training Bar’s shaft features the perfect whip for Weight Lifting and it has a lifetime warranty against bending and breakages
Rifle Pro-Training Bar
Rifle Pro-Training Bar

The Rifle Pro-Training Bar is a Weight Lifting Bar. It can be included among the Xenios USA® Training Bars as a perfect tool for Weight Lifting Classes and Olympic WODs. It features the ultimate patent-pending “Rifle Knurling”. The Rifle Knurling was developed by the Xenios USA® R&D Dept inspired by the pattern used on firearm grips.

Also Purchased