Showing all 26 results
Showing all 26 results
The XRIG™ series can be also manufactured following the really heavy duty features of the MAGNUM™ range of products. Thought for those who really need to face severe workout, the MAGNUM™ series is a kind of tank-like range of products that can be never-ending overloaded
At Xenios USA® we have thought to the best way to let some products be also manufactured following a kind of next-level bill of specifications. There are some workout tools, such as the Squat
Stand, or the Yoke and Sled, or the Utility Flat Bench, or many parts and pre-set configurations of the XRIG™ series, that may be employed to bear tough workouts or quite heavy body-weights,
such as the ones of the Strongmen. Due to those reasons, all mentioned items have been also drawn bigger and stronger: they have been drawn in order to comply with the serious overloading
tests performed on to all the products that aim to belong to the MAGNUM™ series. All products made to belong to the MAGNUM™ series are made with an industrial grade of steel tubes. All square
steel tubes are bigger in size – switched from the standard 6×6 cm. to the oversized 8×8 cm. – and in thickness – switched from the standard 10 Gauge (3 mm.) or 11 Gauge (3.5 mm) to the oversized
8 Gauge (4.2 mm.).
All MAGNUM™ series products are welded by using a special certified kind of welding-robots, commonly involved with the construction of industrial machines like big cranes. All Steel plates and sheets used to manufacture the MAGNUM™ products are thicker than the standard ones. Furthermore, the MAGNUM™ products are tested in order to bear heavier weights: three times higher than their “younger” brothers. E.G.: a Magnum Squat Stand is tested to bear up to 1500 Kg. so we can say it is almost unbreakable.
All MAGNUM™ products parts are made by using industrial grade steel tubes so to really be ready to bear “oversized” workouts. The steel used to make the MAGNUM tubes is normally employed in industrial machine constructions, such as the building cranes. All square tubes are 8×8 cm. sized and 4.2 mm. thickness (8 Gauges), while all the round tubes are 32 mm. diameter by 4 mm. thickness. All steel plates and brackets are made using no-lower than 8 mm. thickness steel sheets. All main steel parts are bolted together just by using M16 bolts, coupled with M16 self-locking nuts: up to 300 Nm in tightening strength. All bolts feature safety pvc end-caps so to avoid any chance of injury with the offset of the same bolts out of the nuts after being tightened. All hardware is zinc plated so to be rust-proof.